This is a public-interest archive. Personal data is pseudonymized and retained under
GDPR Article 89.
Re: Board Curve / Treatments
- To: "Square Foot Gardening List" sqft@listbot.com>
- Subject: Re: Board Curve / Treatments
- From: "Souliere" souliere@iname.com>
- Date: Sun, 6 Feb 2000 19:11:09 -0600
- References: 20000206230147.3111.qmail@www0d.netaddress.usa.net>
Square Foot Gardening List - http://www.flinet.com/~gallus/sqft.html
> >However, the wood does rot fairly quickly, and replacing
> pieces can be a real pain
Paint the wood. And if you must a layer or two of plastic
(particularly below surface level).
You may want to consider actually getting Marine Paint.
It is designed for boats that are in constant contact with
the water.
Also there are resin based "paints" that will actually give
you a coat of plastic. (but these are expensive...)
On the boards warping or cupping. I keep my beds in
place with 18 inch pieces of 1/2 inch rebar driven thru
the wood into the soil. You could use small ubolts to
hold the rebar to the board at 3 places (if you don't know
which way it will warp, or at one place (the middle of the board
if the rebar is on the side the board will cup to). I have seen
some peple use 6x6 posts outside their beds. Being outside
they don't rot fast and also (when fastened to) give great
rigidity.
Ron Souliere
______________________________________________________________________
To unsubscribe, write to sqft-unsubscribe@listbot.com
______________________________________________________________________
Start Your Own FREE Email List at http://www.listbot.com
Other Mailing lists |
Author Index |
Date Index |
Subject Index |
Thread Index