Re: Problems getting seed hulls to pull off when germinating ...HELP please ?????

Troy,

I try removing the hull as soon as I see the top soil heaving upwards, I
remove some of the soil (as soon as I see the soil heaving) and then try and
remove the seed hull. Last year I was waiting too long to remove the hull
and it was causing a decapitation of the leaves (they were getting stuck in
the hull while trying to push it off, I lost a nice Hunt 991 this way and a
Mombert 888).  So at this point I am perplexed?

David
----- Original Message -----
From: "Robert Troy" <rptroy@earthlink.net>
To: <pumpkins@hort.net>
Sent: Wednesday, May 08, 2002 4:00 AM
Subject: Re: Problems getting seed hulls to pull off when germinating
...HELP please ?????


> Try pulling them off a little sooner. Spread the bottom portion of the
shell open as your gently pulling them off. Misting them just before you
pull
> them off also helps a little bit.
>
> Keep the soil moist but not wet.
>
>
>
>
> mwronski81@attbi.com wrote:
>
> > I have been having problems (for 2 years now) getting my seeds (or at
least
> > the newer genetic thick wall type seeds) to kick off the outside
hull/shell
> > in time so as not to ruin the sprout inside.
> >
> > Currently I have a 1020 Papez that sprouted (sent a tap root down into
my
> > soiless mix), but it seems that the hull didn't come off quick enough or
> > easy enough.  I pulled it off, but the sprout does not look good.
> >
> > I also sprouted a 1131 (UOF) Bruce Whittier, and it did the same thing,
it
> > pushed out a tap root, but the hull didn't pop off quick enough, I
removed
> > it, but it also looks No good ... (I didn't remove the hull quick/or
easy
> > enough).
> >
> > I have some other seeds from Nesbitt and Hugh Wiberg and they sprouted
> > perfectly, the hulls came off no problem.
> >
> > What I do:
> > 1).  lightly sand edges of seed
> > 2).  soak seed in paper towel in baggie for about 4 to 6 hours.
> > 3).  plant seed in 4 inch peat pot with soiless mix (very light mix)
> > 4).  water pots with mister
> > 5).  put pots in clam kettle that has insulation on the outside of it to
> > keep temps. consistent.
> > 6).  Then I put a painters lamp over the pot and heat the pots to about
82
> > degrees..
> > 7).  I mist the pots every 6 hours or so, to keep them lightly moist,
not
> > overly wet (maybe I should keep them very wet?).
> > 8).  Usually my past seeds sprout in 3 to 4 days using this method (my
> > Nesbitt, Wiberg and some of my own seeds from a 627lb. sprouted already
with
> > no problem).
> >
> > Is it possible that I need to do something different with these newer
> > 'genetic' type seeds?
> >
> > Any advice is appreicated.
> >
> > Thanks,
> >
> > David Wronski
> >
> > ---------------------------------------------------------------------
> > Pumpkin-growing FAQ: http://www.hort.net/lists/pumpkins/search.cgi
> > To sign-off this list, send email to majordomo@hort.net with the
> > message text UNSUBSCRIBE PUMPKINS
>
> ---------------------------------------------------------------------
> Pumpkin-growing FAQ: http://www.hort.net/lists/pumpkins/search.cgi
> To sign-off this list, send email to majordomo@hort.net with the
> message text UNSUBSCRIBE PUMPKINS
>

---------------------------------------------------------------------
Pumpkin-growing FAQ: http://www.hort.net/lists/pumpkins/search.cgi
To sign-off this list, send email to majordomo@hort.net with the
message text UNSUBSCRIBE PUMPKINS
Other Mailing lists | Author Index | Date Index | Subject Index | Thread Index