Re: LABEL MAKERS
----- Original Message -----
From: Preston Littleton <plittleton@ce.net>
To: <hosta-open@mallorn.com>
Sent: Saturday, November 25, 2000 2:02 PM
Subject: LABEL MAKERS
> Further research at the Staples site for label makers also revealed a Dymo
> Labelwriter EL60 Printer that will print labels up to 2.25" wide
*************************
The "holders" I make, are a 2" x 4" rectangle of 1/8 th " aluminum. I have
them cut by near-by welder. He also cuts me 3/4 th " wide stakes in
verious lengths. The lable face, I run in my grinder, to smooth up the
edges, and then I grind a rough surface, on the back of the lable face, and
on the top of the stake, where the two will meet. I use J B weld
avaliable at most stores, with glue products) It only takes a little, and
"weld" them laying flat. They will "cure" overnight. You can then take
long Vise Grips, or a vise, and put a bend on the stake, where it joins the
face. These look great with the P. Touch lables.
Ran
>
> Ran make some plant makers out of aluminum (I believe). Maybe he will
> refresh our memory about them.
>
> Preston Littleton ( plittleton@ce.net )
> Seaford DE
> zone 7
>
>
>
>
> ---------------------------------------------------------------------
> To sign-off this list, send email to majordomo@mallorn.com with the
> message text UNSUBSCRIBE HOSTA-OPEN
>
---------------------------------------------------------------------
To sign-off this list, send email to majordomo@mallorn.com with the
message text UNSUBSCRIBE HOSTA-OPEN
