CULT: Shade Cloth
- To: Multiple recipients of list <i*@rt66.com>
- Subject: CULT: Shade Cloth
- From: S* M* <7*@compuserve.com>
- Date: Wed, 22 Apr 1998 08:58:35 -0600 (MDT)
Linda Mann asked that I explain
how we mount the shadecloth....
1. Set a post at each corner
of the bed to be covered, with
tops leveled at about 18" above
the ground.
2. Mount a frame on top.
[Imagine a picture frame made
out of 2x4's & 2x2's.]
3. Cut cloth to size. and drape =
it over the top. Extend the cloth
down over the sides for wind
protection, or leave the sides
relatively open if aeration is
needed.
4. Miter each corner, holding it
in place with a plastic clip [as
recommended and supplied
by the manufacturer] or pin-baste
it with long, slender nails. =
SIGNA published an article on =
this a couple of years ago, with
photos.
Sharon McAllister
73372.1745@compuserve.com
