RE: Hypertufa Recipes WAS Re: Hypertuba & the Recipe
- To:
- Subject: RE: [iris-talk] Hypertufa Recipes WAS Re: Hypertuba & the Recipe
- From: S* S*
- Date: Sun, 14 Jan 2001 23:34:57 -0500
- Importance: Normal
I know that this thread has already pretty much run its course, but I was
doing a search and decided I would kind of backdoor my search based on
hypertufa, since I was sure I would find some sites I was looking for using
this term. I was not as successful as I had hoped in my own search, but I
did turn up a number of sites with good recipes and tips, and thought I
would share them with you.
http://www.backyardgardener.com/tufa.html
http://home.flash.net/~blhill/pages.aux/pond/recipes.html
http://web.ukonline.co.uk/alpines/trough%20garden.htm
http://www.nettally.com/skinnerd/hypertufanew/Hypertufa.htm
http://www.efildoog-nz.com/hypertufa.htm
http://www.the-water-garden-and-garden-pond-place.com/Hypertufa.htm
http://home.flash.net/~blhill/pages.aux/pond/hypertufa/hypertufa.html
http://www.powellgardens.org/hypertufarecipe.htm
\\Steve//
For tropical fish and aquariums in MA, visit:
http://www.petsforum.com/was/
If you are in the DC Metro area, visit:
http://www.pvas.com
If your interest lies in dogs, visit:
http://www.petsforum.com/ace/
Manager Fish Club and Society WebRing
http://www.petsforum.com/was/fishclub/fishclub.html
List Owner: fishadmin
http://www.eGroups.com/group/fishadmin
subscribe: f*@egroups.com
Visit my family at:
http://www.familyszabo.com
-----Original Message-----
From: laird.kelly@juno.com [l*@juno.com]
Sent: Tuesday, January 09, 2001 11:47 PM
To: iris-talk@egroups.com
Cc: no-tags-request@junoaccmail.org
Subject: Re: [iris-talk] Re: Hypertuba & the Recipe
On Tue, 09 Jan 2001 18:09:12 EST Pooreplace@aol.com writes:
...
> >Hypertufa is a light-weight concrete 'artificial stone' with peat
> >(or other light weight material) substituted for the gravel used in
> >conventional concrete - formulas vary but a typical formula is:
>
> > 1-2 parts sharp sand
> > 2 parts peat moss
> > 1 part portland cement
>
> >mix sand, peat, and cement thoroughly (NO lumps!). Gradually add
> >water to dampen - mixture should be just damp enough to stick
> >together when squeezed *without* dripping any water. Press
> >*firmly* into form. Allow minimum of 24-48 hours before removing
> >form and at least two weeks curing time *without* drying out.
> >Perlite may be used in place of half the sand to reduce weight but
> >finish will be less stone-like.
>
> Okay, starting to get the idea.... But now for this RECIPE... What
> the HECK is SHARP sand and PORTLAND cement?!?!?
>
Sharp sand:
I don't know why they call it "sharp" but it's also called "builder's"
sand - it's just *clean* sand suitable form concrete (no salt or other
contaminants)
Portland cement:
Nothing to do with Oregon or Maine (the name seems to be derived from
"portland stone", a limestone quarried near Portland, England), it's just
the cement used to make concrete
A couple of good hypertufa webb sites are:
http://web.ukonline.co.uk/alpines/trough%20garden.htm
http://www.backyardgardener.com/tufa.html
> I only know Play sand & don't have time to go to Oregon for cement.
> Please advise. Is it really good for iris?
>
I haven't personally tried iris in hypertufa but wouldn't expect any
problems except maybe with bulb iris that don't like lime or with
water-loving species that like less drainage
._,
C(O-O)@ Sholem aleichem laird.kelly@juno.com
--o00-(_)-00o--------------------------------------------------
WSU Master Gardener *Team AMiGA* FIDO 1:138/258, 1:18/140
