Re: OT:Show Vases
- To: Multiple recipients of list <i*@rt66.com>
- Subject: Re: OT:Show Vases
- From: "* I* J* <j*@ix.netcom.com>
- Date: Wed, 7 Jan 1998 23:24:08 -0700 (MST)
Chad Schroter wrote:
>
> I believe our club uses white PVC pipe (3/4") 12 - 16" long which is
> attached to a wooden base (5" x 6" x 3/4" ?) the ID tags can be hung in the top
> of the pipe with a paper clip. I think you should be able to drill a flat
> bottomed hole (Forstener bit) 3/4" in diameter and 1/2" deep and glue the pipe
> into the bases with epoxy.
>
My club does the same thing except that they use the end caps available
for the PVC on the bottom ens. Holes can be drilled in the wood block
bases (pieces of 2 X 6 about 6" long) snug enough to hold the piece of
pipe, but thay can be taken apart and thus store more compactly. We have
two sizes available - 3/4 and 1".
John | "There be dragons here"
| Annotation used by ancient cartographers
| to indicate the edge of the known world.
John Jones, jijones@ix.netcom.com
Fremont CA, USDA zone 8/9 (coastal, bay)
Max high 95F/35C, Min Low 28F/-2C average 10 days each
Heavy clay base for my raised beds.
