Re: Tiny split (andrew)
- To:
- Subject: Re: Tiny split (andrew)
- From: J* S*
- Date: Tue, 29 Aug 2000 16:55:28 -0400
- List-Archive: <http://www.mallorn.com/lists/pumpkins/> (Web Archive)
- References: <006701c011ec$2c22b500$03000004@stwe1.on.home.com>
Andrew
Before you go too far, give this a little thought.
It is possible to use another similar piece to make a plug from another pumpkin.
Oddly, I have done this and as long as the plug is a good fit it can
actually heal up! Here are some rules to follow though. 1. use an actual steel
drill to assure the hole is perfectly round and make sure it removes enough
material to get to nice fresh surface 2.I would use a pimpkin from the same
plant if it is at all possible to make the plug. If this can't be done, another
pumpkin that came from the same seed (even if on another plant) may work. 3. the
plug should be a nice snug fit.(very slightly larger than the hole you make)
Enlist the assistance of a carpenter who is familiar with dowling or pegging
together furniture if needed. 4. make an estimate of what you feel the thickness
is at this point in the fruit and make the plug as close to that as possible. 5.
use rubber gloves and work fast to avoid contamination. 6. treat the
wound.
As I said, in an effort to keep a fruit into
Oct. last year for a halloween festival I tried this as a matter of
desparation. To my surprise, it actually healed within 10 days and formed a nice
stable crust around the spot where the plug was made. It was actually nearly
impossible to see where this had been done. Above is how I approached the
problem. My problem was exactly as you describe yours.
I can not say the following will work, but
if you have nothing else to use as a material to make a plug, I would consider
cutting a piece of vine from the same plant and using it for plug material.
You may be able to carve what you need from vine material (witout the skin of
course)
YOU HAVE NOTHING TO LOSE!!!!
|
- Follow-Ups:
- Re: Tiny split (andrew)
- From: G* S*
- From: G* S*
- Re: Tiny split (andrew)
- From: "A* P*"
- From: "A* P*"
- Re: Tiny split (andrew)
- References:
- Tiny split
- From: "A* P*"
- From: "A* P*"
- Tiny split
- Prev by Date: RE: Tiny split
- Next by Date: RE: Tiny split
- Prev by thread: Tiny split
- Next by thread: Re: Tiny split (andrew)