Re: building raised beds

---

• To: "Square Foot Gardening List" sqft@listbot.com>
• Subject: Re: building raised beds
• From: "vance" vance@mozcom.com>
• Date: Tue, 4 Apr 2000 09:54:28 +0800
• References: 014101bf9d86$effd5a00$0200a8c0@Bobisuthi> 006701bf9da1$0e1adc00$76fa96d1@clarityconnect.com>

Square Foot Gardening List - http://www.flinet.com/~gallus/sqft.html

Hello,

I too at first didn't want to put on the outside.
Then I realized that the stakes can be spaced 12" apart and use to attach the twine to make the 12"x12" squares.(a grid) and have the dual purpose of supporting the walls.

Use a nice adjustable knot so in the event the twian becomes slack it can be pulled tight again.

it is much better then putting nails in the top of the wood to fasten the twian didviders.
I used 1/4 re-bar, it is cheap, easy to cut, and easy to hammer into the ground.

Vance 

@listbot.com
______________________________________________________________________
Start Your Own FREE Email List at http://www.listbot.com


______________________________________________________________________
To unsubscribe, write to sqft-unsubscribe@listbot.com
----------------------------------------------------------------------
Advertisement:
Workstation with Monitor under $800!
So, you just heard that you need to add how many new workstations by
the end of next week? Check out the bundle below. It includes
everything you need to get everyone up and running quickly.
http://www.listbot.com/links/cdw5

• References:
  • building raised beds
    • From: "t* B*"
  • Re: building raised beds
    • From: "j*"

• Prev by Date: Re: Sqft Gardener's Logbook - week of 4/3/00
• Next by Date: Where Am I getting al this great free wood?
• Prev by thread: Re: building raised beds
• Next by thread: Re: building raised beds & filling them